您好,欢迎来到烟台威嘉机械设备有限公司官方网站。
联系我们

烟台威嘉机械设备有限公司

网址:http://www.weijiayt.com

固定电话: 0535-6328630

联系人:黄经理

手机:15006550282

E-mail:ytwj_huangwei@163.com

地址:烟台市福山区凤凰山路143号

YANTAI WINPLUS MACHINERY CO.,LTD

Tel:0535-6328630

Contact: Calvin Huang

Mob:15006550282

E-mail:ytwj_huangwei@163.com

Add:No.216. Fenghuangshan Rd., Fushan Dist.,Yantai

湖北全自动间歇式预发机 EPS Pre-expanding Machine当前位置>首页 > 湖北产品展示 > 湖北EPS预发机EPS Pre-expandingMachine >
详细介绍
湖北全自动间歇式预发机 EPS Pre-expanding Machine




1.称料部分采用专用称量控制器和载重单元,由触摸屏与PLC控制可做到精准控制原料投入量,使偏差达到最小(±0.05kg)。
Material weight measuring section takes special measuring controlling device and loading device,they are controlled by Touch Screen and PLC,the infeed amount can  be controlled accurately,the tolerance can be the smallest(±0.05kg).
2.料位控制方面采用韩国进口振动式发泡感应控制器,可正确感知发泡粒的上升度,维持发泡比重偏差为最小值(18-25g偏差在±1%)。
For the material level controlling,the machine takes vibration Induction controller Which is imported from Korea,it can feel the rising rate of the beads,keeps the Expanding density as the min. Rate(tolerance ±1% for 18-25g)
3.预发罐上装有温度控制装置,能将发料炉的温度变化控制到最小,达到节约热能的效果。
There is temperature controlling device in the pre-expanding vessel,it can control the temperature change into smallest level so that it can save the heat energy.
4.汽水分离装置能有效消除凝结水的发生及发泡粒的结块现象,进而达到减少原料含水率的目的。
Steam-Water discharge device can avoid the solidification of the water and the lumping of the foam, thus it can reduce the water entrainment rate of the material.
5.机器运作中突然发生停止情况(如停电或机械发生严重问题)时,蒸汽阀会立即自动关闭,同时会自动供应空气到发料炉内,以防止料在发料炉内结块,为产品的品质提供双重保障。
When emergency accident happens (eg.power off or there are some serious problems with the machine), the steam valve can be automatically closed immediately,at the same time,the air can be infeed in the vessel automatically in case the material be lumped in the vessel.this can give double insurance for the product quality.
6.友好的人机界面。触摸屏控制系统可以自动检测故障并发出警报,告知故障发生位置及修复方法,使维修更加简便快捷。
Friendly MML.Touch screen can automatically detect the default and send out alarm in order to inform the default position and repairing method,this will make maintenance more easy and quick.
7.设备操作简单。可根据不同原料、不同克重来设定投料重量和各种设定参数并自由保存,以便下次预发时可直接提取使用,大大提高了工作效率。
The equipment can be operated easily.The operator can set feeding weight and other relevant parameters according to different material and their different density,and the setting can be saved freely, this can help the operator output directly during next cycle, this can improve the working efficiency as possible.
8.加热底板为优质不锈钢材质,采用精密激光切缝。加热时蒸汽穿透更加顺畅和均匀,使发泡比重更加稳定,颗粒更加均匀,并能减少蒸汽消耗,这样可以很大程度的节约原料成本和能源成本。
The heating base plate is made of high quality stainless steel and after precious laser cutting.During heating,the steam can pass through the base plate more smoothly and equivalently,this can make pre-expanding density more stable,the parcels will be more even,the steam exhaust can be reduced accordingly,this can save the material cost and the energy cost as much as possible.





上一篇:已经是第一条了     下一篇:已经是最后一条了
相关资讯
相关产品